Dielectric Code	EIA	COG	X7R
	IEC	1BCG	2R1
Temperature Characteristics *1		0 ±30 ppm/oC, C > 20PF 0 +120 ppm/oC, C£20 PF -40	ΔC±15% maximum over -55oC to + 125oC
Operating Temperature Range		-55oC to + 125oC	-55oC to + 125oC
Measuring Conditions for *2 Capacitance and D.F.		1MHz, 1 Vrms, C £ 1000 PF 1KHz, 1 Vrms, C > 1000 PF	1 KHz, 1 Vrms
Dissipation Factor (D.F.) and Tangent of Loss Angle (tan)		£0.1% for C ³ 30 PF £ 100% for C<30PF (400+20C)	rated voltage £2.5%   ³50V £3.5% 25V 16V £5.0% 10V 6.3V
Insulation Resistance (I.R.) after 60 secs. charging at rated voltage, 25oC, 55% RH max.		³100 Gohms or ³1,000 MW .µF whichever is less	³10 Gohms or ³100 MW .µF whichever is less
Voltage Proof, 25oC, 1-5 secs.		2.5 x Rated Voltage	2.5 x Rated Voltage
Capacitance Aging		0	¡Ü1.5% per decade hour

Dielectric Code	EIA	Z5U	Y5V
	IEC	2E6	2F4
Temperature Characteristics *1		ΔC+22%, -56% maximum over +10oC to + 85oC	ΔC+22%, -82% maximum over -30oC to + 85oC
Operating Temperature Range		+10oC to + 85oC	-30oC to + 85oC
Measuring Conditions for *2 Capacitance and D.F.		1KHz, 0.5 Vrms	1 KHz, 1.0 Vrms
Dissipation Factor (D.F.) and Tangent of Loss Angle (tan)		£4.0%	rated voltage £5.0% 50V   £7.0% 25V 16V £10.0% 10V 6.3V
Insulation Resistance (I.R.) after 60 secs. charging at rated voltage, 25oC, 55% RH max.		³10 Gohms or ³100 MW .µF whichever is less	³10 Gohms or ³100 MW .µF whichever is less
Voltage Proof, 25oC, 1-5 secs.		2.5 x Rated Voltage	2.5 x Rated Voltage
Capacitance Aging		¡Ü5% per decade hour	¡Ü3% per decade hour

*1. Class II (X7R, Z5U, Y5V) capacitors shall be made a special pre-conditioning before a test or a sequence of tests under the following conditions : Exposure at 150 ± 10^oC for 1 hr, followed by setting the capacitor at room temperature for 24 ± 1 hr.

*2. Capacitance is within specified tolerance; measured 1000 hours after date of manufacture because of capacitance aging of Class II capacitor.